Millwashing - Now £3,510.00 Was £4,500.00 (Saving of 22%)

It eliminates the risk of malpractice due to the handling of infected instruments (instruments, turbines, hand-pieces, etc.) and provides treatment and thermal disinfection Completely automatic in all cycle phases (pre-washing, washing, disinfection, drying), it allows the operator to go directly to the sterilisation phase without additional handling.

Entirely in AISI 316 stainless steel, it is equipped with a formed washing chamber for a high level of self-cleaning conforming to European Safety and Hygiene standards (Class IIa medical device –Directive 93/42/CEE).

Microprocessor controlled electronic, liquid crystal display, customizable programs

Integral locking system, two independent probes for the control of the disinfection process and buzzer to indicate faults and detergent control.

3 programs:

Program 1 for lightly soiled materials, turbines and hand-pieces (washing with liquid neutral PH medical detergent and thermal disinfection at 93°C for 1 minute)

Program 2 for normally soiled materials (pre-washing with cold water, washing with liquid neutral PH medical detergent at 45°C and thermal disinfection at 93°C for 3 minutes)

Program 3 for heavily soiled materials (intensive pre-washing with cold water, washing with liquid neutral-PH medical detergent and thermal disinfection at 93°C for 10 minutes)

Hot air drying system with a DOP 98% filter allows the total elimination of residual water both inside and outside of the instrument

Multifunction support capable of containing all the most common types of instruments and containers

Printer connection

  • STANDARD EQUIPMENT
  • 4 Hand-pieces basket w/hollow instrument connection
  • 8-position tray basket
  • vertical instruments basket
  • burs basket
  • flexible pipes support (optional)
  • CHARACTERISTICS MILLWASHING
  • Dimensions(LxHxP): 560x535x575 mm
  • Net weight: 43 kg
  • Gross weight: 46 kg
  • Power supply voltage: 230V – 50Hz
  • Nominal power: 2950 W
  • Pump power: 150 W
  • Drain connection D. 25 mm
  • Cold water plumbing connection ¾”
  • GAS – Min/Max pressure 1.0-5.0 bar
  • Capacity: 65 l
  • Flow capacity 24l/min at 2 bar pressure
  • Noise level 52 dB

Part of the Tooth Whitening System Range