DSA 2000L Plug and Play - Now £9,250.00 Was £10,750.00 (Saving of 13%)
The DSA treatment concept is installed by simply inserting the plug into the wall socket.
Essential in this concept are the DSA treatment units, which are produced in several variants. DSA treatment units have a built-in water- and air provision. Therefore the DSA treatment concept can be connected without any costly cutting and breaking, without laying any pipes and without any renovation. Moreover, the DSA units are safe by their controllable spray water system, without Legionella.
Practice interior
DSA treatment units are easy to connect, reliable and easy to maintain. Within two hours it is even possible to equip a complete surgery with new treatment equipment including the dentist’s chair, suction system and surgical lamp.
Hygiene
The DSA 2000L can entirely be operated by foot via the multifunctional foot switch. No more unnecessary switches and displays. By the application of mechatronics all rotating instruments are provided with a “no retraction system”. The two built-in and easily removable autoclaved liquid reservoirs, can be used for any coolant you wish. An addition to the water provides a pleasant taste of menthol, disinfects and descales. This also saves considerable investments in water conduits and discharge pipes. The tray with built-in instruments holder is manufactured of Corian®. This massive, non-porous, scratch- and impactproof material is seamless and therefore very easy to clean. The Corian® top is available in over 50 colours without additional cost. All rotating
instruments, the multiple-function syringe and the scaling device can be autoclaved.
Ergonomics
All rotating instruments are provided with fibre optic so that your view of the operating field is optimal. Infrared sensors provide an automatic instrument selection. All instrument hoses are especially developed, very light-weight and also anti-bacterial. You can easily exchange the hoses yourself. All functions, such as spray, left/right of rotation, chipblow and speed control can be operated with the multifunctional foot switch. This foot switch is available in several designs.
Quality
The micro-motors are of Swiss Bien- Air make, this also applies for the contra angle hand pieces. You can choose between DSA, EMS and Satelec scaling equipment. The DSA 2000L is manufactured in high-grade steel and provided with a scratchresistant powder coating. Against additional costs the DSA 2000L is also available in stainless steel. By the use of a silent built-in air provision directly at the source, an optimal tensile strength of the turbine is guaranteed. The inside of the pressure tank is provided with a Teflon coating so that formation of rust is out of the question.
All the advantages once again
• A plug will do, so no expensive wiring and piping needed
• Easy useable for right- and lefthanded operators
• Controllable spray-water system, this means no Legionella
• Continued working guaranteed for multi-room Practices, notdepending on one compressor
• No expensive engine room for compressor and suction motor
• Low maintenance costs
Technical specifications
- Mains voltage:
-
230 volt 50/60 50/60Hz
-
Consumed power: 400 Watt / 3 A
-
Mains fuses: 2 x 8 A type G slow
-
Air provision: 50L/Min. 8 bar
-
Water content: 4 litres
-
Weight: 57 kilograms
-
Dimensions:
-
79 x 45 x 62 cm, h x w x d
-
Dimensions top: 45 x 38 cm, w x d
-
Paint colour: RAL 9002
-
Design: Ory I.D&D
